How To Install The Air Conditioning?

split system air conditioning

If you want that your home should remain cool in summer and warm in winter, then split system air conditioning is the best option. It is less costly than the ducted air conditioning installation. The duct ac installation is quite difficult and hectic.

In this article, you will know how air conditioning installation agencies work. So following are the steps you should know while the work is going on.

Setting the indoor unit:

As we all know that the split system air conditioning has two units one is indoor, and the other is outdoor. So, the indoor unit should be placed on the wall in which a small hole can be made for passing the pipe to the outdoor unit. This is the first step in air conditioning installation.

You must select a wall that does not face direct sunlight. It affects the performance of the split system air conditioning. The distance of the floor and ac must be 7 feet from the floor. Another thing that you must take care of is that the ac must not be surrounded by anything. It affects the performance of the ac.

Passing the wires from the hole:

While air conditioning installation, you have to cut the wall with the help of the driller. The hole must be 3 inches wide. Make sure that the hole is made in the downward direction for the easy drainage of water.

After the hole is made, pass the copper wire and drainage pipe to the outside. Make sure the wires inside the indoor unit are properly fixed. It must be according to the diagram as shown in the instruction book.

However, in a split system air conditioning, there are two units to install, so when you are done with the indoor unit, now you can move to the outdoor unit.

Position of the outdoor unit:

It is obvious that in split system air conditioning, the outdoor is at the back of the wall. Hence, place the unit at a distance of 12 inches from the wall. This will allow the outdoor unit to work properly. The outdoor air conditioning installation must be done properly. If not, then you do not get the required performance of the ac.

Connection of wires should be proper:

Place the outdoor on a form place like on concrete that reduces the noise and vibration. While split system air conditioning you have to make sure that all the wires are connected with the outdoor unit properly. The process included in the air conditioning installation is done properly.

Conclusion: 

In a nutshell, take care of each step and all the tricks that are mentioned in the article for the best performance. Split system air conditioning is easy than the other types of air conditioning installation.